–VRF Top Flow
– Choose from up to 4 system types
Heat Pump systems can operate in either Heating or Cooling mode – suitable for new builds and refurbs replacing fossil fuel heating with renewables
High Ambient – also a Heat Pump, but rated for use in higher outdoor temperatures (up to 52°C and with continual operation and 54°C interval operation)
Heat Recovery - allows simultaneous cooling and heating in different zones by transferring waste heat from a zone being cooled to a zone that requires heating. Ideal for buildings where spaces have different levels of sun exposure especially during seasonal changes, and those with unequal occupancy in different zones – for example meeting rooms, public areas, classrooms, etc.
– Cut your energy consumption and carbon footprint in half
– Wide choice of indoor units including domestic hot water generation
– Save space and lower delivery & installation costs
– airCloud Tap - 4x faster to configure systems, 6x faster to access data
– Easy to operate & automate with airCloud Pro
– 39% more efficient under part load conditions
– Gas-injection scroll compressor
– Affordable indoor air quality upgrades
– Enhance occupant comfort
In room heating scenarios, it’s common to hear users complain of cold feet because heat naturally rises. FeetWarm helps to solve this problem by optimizing airflow in heating mode to ensure that the leg zone is consistently heated. In cooling scenarios, FloorSense Cool can prevent the floor area from overcooling by controlling airflow and cooling capacity so that the air at floor level does not get as cool as air above knee height.
– Works reliably in extreme weather conditions
– Highlight Benefits
 The CO2 emissions coefficient is 0.441 kg-CO2 /kWh. Based on Electric Power Industry Council for a Low Carbon Society in FY20.
 Refers to air365 Max Heat Pump models.
 Refers to air365 Max Cooling Only models.
 Comparing Hitachi Set Free Sigma 28HP system with air365 Max 28HP system. Similar footprint reductions achieved across all capacities.
 Refers to air365 Max models. Conventional way to open and close the cover and manipulate dip/power switch takes 40min 40sec. By using airCloud Tap without opening the cabinets: takes 9min 40 sec. [Simulation scenario] total 4 ODUs initial setting. total 5 items setup; ODU number, Refrigerant cycle number, Higher ESP setting, Power Supply setting, and Compressor manual-off setting.
 Conventional way takes 103min 16sec. By using airCloud Tap: takes 47min 40 sec. [Simulation scenario] Total 20 controller setting. Total 7 items of setup: Room name, Time, Language, Temperature unit, Backlight of the screen, Operation schedule from Monday to Friday 08:30~18:30 28°C , Upper and lower limit of setting temperature for both cooling and heating.
 Refers to air365 Max models. Test simulation scenario: Check the alarm cause. [Previously] open up the cabinet panel, open the electricity box cabinet panel, check the PCB error code, close the 2 cabinet panels. Requires minimum 3mins. [with airCloud Tap] open the airCloud Tap application, TAP the outdoor unit to access all settings and download operational data. Requires approx. 30secs.
 Testing Condition (at Cooling Operation, Load Factor: Approx. 33%) Without SmoothDrive; average power consumption 2.46kW / With SmoothDrive; average power consumption 1.49kW. VRF ODU:(RAS-AP280DG3 = RAS-10FSNS) & VRF IDU: 4-way cassette indoor units (RCI-AP140K5 = RCI-5.0FSRP) & Indoor Unit Inlet Temperature: 27°C (Dry Bulb) / 19°C (Wet Bulb) Ambient Temperature at Air Volume “High”: 23°C (Dry Bulb) / Piping Length between Indoor Unit and Outdoor Unit: 15m / Testing Location: Environment Testing Facility at Kansai Denryoku (power supply company).
 Refers to Ionizer Kit test conducted Aug/Sept 2020 at Nara Medical University. Ozone Density : 0.1ppm. Tested Sample: Ozone generator which keeps 0.5~3.0 ppm emission in a space of 6.7L after 3 min generation. Host Cells: VeroE6/TMPRSS2. Washing-out Solution: SCDLP medium. Testing Condition: 19.6~21.8℃, 50.0~59.7%RH (Humidity) . Infectivity Measurement Method: Virus Plaque Assay. Also to ViroSense Z2 test conducted June 2021 at Japan Textile Product Quality and Technology Center using testing method ISO 18184.
 For example, [Escherichia coli] [Staphylococcus aureus], [Influenzas virus] and others. Numerous tests on various products.
 Requires optional motion sensor kit available for many Cassette and Suspended Ceiling models.
 Available on select Cassette models. Requires optional cassette panel with Motion Sensor & Radiant Temperature Sensor.
 air365 Max models. 54C refers specifically to air365 Max High Ambient under interval operating.
– Hitachi VRF systems for multi zone climate control
Our range of cooling and heating solutions provides households and businesses with the leading climate control technology to create and maintain the perfect indoor environment. Our advanced VRF solutions for multi zone cooling and business applications offer the versatility that each project requires, as well as unbeatable efficiency and reliability. Our collection of elegant and efficient options are designed to adapt to you and the spaces that they inhabit.