LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)

Wall Mounted Remote Control

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_header

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)

Wall Mounted Remote Control

This wall mounted room controller is designed for use with the Yutaki S80 high-temperature split air-to-water heat pump and some Yutaki M monobloc air-to-water heat pump models.
LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_0

Easily set-up your air-to-water heat pump

From this controller, all the operation of the heating system can be configured and adjusted. During commissioning the Configuration Wizard will help a heating professional or homeowner complete a fast setup of the system by asking simple questions. Manual configuration is also possible, with all the parameters available in the system configuration menu.

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_1

Integrated thermostat

In addition to the integrated room thermostat it is also compatible with wireless ATW-RTU Hitachi thermostats enabling set temperature monitoring and control in different parts of the house.

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_2

Combine multiple controllers in a single system

Multiple PC-ARFH1E controllers can be installed in one system – with one controller acting as the master and the other as slave units – for example in each room.

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_3

Simple & advanced heat pump controls at your fingertips

Using the large LCD display and 8-button control interface, users can control the hot water system, and different zones for space heating (and cooling if installed). Control functions include operation mode selection, temperature setting, eco mode and a weekly timer function with up to 5 on/off schedules per day. In addition, room temperature, outdoor temperature (via the outdoor unit of the heat pump) and water temperature, can all be monitored.


Advanced parameters are available from the Installer menu, including water pump speed setting, current water flow reading and the ability to fine-tune advanced parameters of the Yutaki unit to match the requirement of various installations.

LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)_4

Smart Grid ready

Smart Grid Ready functions can be selected and activated from the controller, allowing advanced interlock control of the Yutaki air-to-water heat pump system with smart grids or photovoltaic systems. A dedicated menu is available to configure these functions as well and input / output contacts available on the Yutaki unit terminal board.

Brochures and catalogues: LCD Wired Controller for Yutaki M and S80 (PC-ARFH1E)

Catalogues, brochures and other documentation. If you need any more information, please get in touch.